Micc 1.9X2.3mm Thin Film Rtd Elements

• Certification: CE
• Type: Customized
• Material: Customized
• Transport Package: Cartons
• Specification: Customized
• Trademark: MICC
• Model NO.: Customized
• Origin: Jiangsu, China (Mainland)
• Production Capacity: 50000piece/Year

Product Description

M series PRTDs are designed for large volume applications where long term stability, interchangeability and accuracy over a large temperature range are vital. Typical applications are Automotive, White goods, HVAC, Energy management, Medical and Industrial equipment.
The measuring point for the nominal resistance is defined at 8mm from the end of the sensor body.

Nominal  Resistance  R0	Tolerance  DIN  EN  60751  1996-07	Tolerance  DIN  EN  60751  2009-05	Order  Number Plastic  Bag	Order  Number   Plastic  Box
100  Ohm  at  0º C	Class  1/3B	F  0.1		32  208  466
	Class  A	F  0.15	32  208  715	32  208  465
	Class  B	F  0.3	32  208  714	32  208  440

 

Specification	DIN  EN  60751  (according  to  IEC  751)
Temperature  range	-70º C    to  +500º C    (continuous  operation) (temporary  use  to  550º C      possible) Tolerance  Class  B:   -70º C    to  +500º C Tolerance  Class  A:   -50º C    to  +300º C Tolerance  Class  1/3  B:   0º C    to  +150º C
Temperature  coefficient	TCR  =  3850  ppm/K
Leads	Pt  clad  Ni-  wire Recommended  connection  technology: Welding,   Crimping  and  Brazing
Lead  lengths  (L)	10mm  ±   1mm
Long-term  stability	max.   R0-drift  0.04%  after  1000  h  at  500º C
Vibration  resistance	at  least  40g  acceleration  at  10º C  to  2000  Hz, depends  on  installation
Shock  resistance	at  least  100g  acceleration  with  8ms  half  sine wave,   depends  on  installation
Environmental  conditions	unhoused  for  dry  environments  only
Insulation  resistance	>   100  MΩ     at  20º C;   >   2  MΩ     at  500º C
Self  heating	0.4  K/mW  at  0º C
Response  time	water  current  (v=  0.4m/s):   t0.5  =  0.05s                                              t0.9  =  0.15s  air  stream  (v=  2m/s):   t0.5  =  3.0s                                      t0.9  =  10.0s
Measuring  current	100Ω :   0.3  to  1.0  mA 1000Ω :   0.1  to  0.3  mA (self  heating  has  to  be  considered)
Note	Other  tolerances,   values  of  resistance  are  available  on  request